[ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |

*Written by Jorrit Tyberghein,
jorrit.tyberghein@gmail.com. Mathematical typesetting for
TeX performed by Eric Sunshine, sunshine@sunshineco.com.*

A little explanation about space warping in Crystal Space and how the space warping matrix/vector work should be given.

Crystal Space always works with 3x3 matrices and one 3-element vector to
represent transformations. Let's say that the camera is given as *Mc* and
*Vc* (camera matrix and camera vector, respectively).

When going through a warping portal (mirror for example) there is also a
warping matrix and two vectors, *Mw*, *Vw1* and *Vw2*. *Vw1*
is the vector that is applied before *Mw* and *Vw2* is applied after
*Mw*. The warping transformation is a transformation in world space. For
example, if you have the following sector:

A +---------+ z | | ^ | | | D | o | B o-->x | | | | +---------+ C |

With point *o* at (0,0,0) and the *B* side a mirror. Let's say that
*B* is 2 units to the right of *o*. The warping matrix/vector would
then be:

/-1 0 0 \ / 2 \ / 2 \ Mw = | 0 1 0 | Vw1 = | 0 | Vw2 = | 0 | \ 0 0 1 / \ 0 / \ 0 / |

The mirror swaps along the X-axis.

How is this transformation then used?

To know how this works we should understand that
*Mc* and *Vc*
(the camera transformation) is a transformation from world space to camera
space. Since the warping transformation is in world space we first have to
apply
*Mw / Vw* before *Mc / Vc*.

So we want to make a new camera transformation matrix/vector that we are then
going to use for the recursive rendering of the sector behind the mirror.
Let's call this
*Mc'* and *Vc'*.

The camera transformation is used like this in Crystal Space:

C = Mc * (W - Vc)(Equation 1)

Where *C* is the camera space coordinates and *W* is the world space
coordinates.

But first we want to transform world space using the warping transformation:

W' = Mw * (W - Vw1) + Vw2(Equation 2)

It is important to realize that the
*Mw / Vwn*
transformation is used a little differently here. The *Vw1* vector is
used to translate to the warping polygon first and *Vw2* is used to go
back when the matrix *Mw* has done its work. This is just how Crystal
Space does it. One could use other matrices/vectors to express the warping
transformations.

Combining equations (1) and (2), but replacing *W* by *W'* in (1),
gives:

C = Mc * (Mw * (W - Vw1) + Vw2 - Vc)

C = Mc * Mw * ((W - Vw1) - 1 / Mw * (Vc - Vw2))

C = Mc * Mw * (W - (Vw1 + 1 / Mw * (Vc - Vw2)))

And this is the new camera transformation:

Mc' = Mc * Mw

Vc' = Vw1 + 1 / Mw * (Vc - Vw2)

In summary, the warping transformation works by first transforming world space to a new warped world space. The new camera transformation is made by combining the warping transformation with the old camera transformation.

[ < ] | [ > ] | [ << ] | [ Up ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |

This document was generated using *texi2html 1.76*.